LED Light Source
This fixture uses an LED as it's light source
RGB LED Color
This fixture utilizes full color RGB LED as it's main or secondary light source.
Cool White
This fixture utilizes a Cool White LED as its main or secondary light source
LED Light Source
This fixture uses an LED as it's light source
RGB LED Color
This fixture utilizes full color RGB LED as it's main or secondary light source.
Warm White
This fixture utilizes a Warm White LED as its main or secondary light source
LED Light Source
This fixture uses an LED as it's light source
Warm White
This fixture utilizes a Warm White LED as its main or secondary light source
- DescriptionFire resistant cable suitable for the transmission of audio signals over 100 V speakers lines for voice alarm systems, when maximum safety against fire is required. Made of 2 annealed copper conductors with 2.5 sqmm section. For fixed indoor installations in normal or humid environments. Violet external sheath. Sold in coils of 200 m.PART NUMBER:14380032CV 225EAN 8024530012182Features
- Fire resistant cable
- Suitable for the transmission of audio signals
- For Voice Alarm systems applications
- DescriptionThe DEC 6104 board is to be installed into the DMU 6100 main unit of the RCF FORUM 6000 conference system. This board adds features: Up to 180 DMS 6410 microphone consoles, USB port to connect the system to a PC, RS 485 port (alternative to the USB port), Anti-feedback processor, useful to avoid feedbacks due to loudspeakers too close to microphones, loudspeaker high volume and many open microphones at the same time. Included is the software FSW 6000 that manage and control the conference system.PART NUMBER:17180034DEC 6104EAN 8024530006723Features
- Up to 180 DMS 6410 microphone consoles on 6 lines (4 line outputs are on the DEC 6104 board)
- The further 120 consoles shall be powered by the DPS 6202 power supply unit
- USB port to connect the system to a PC
- FORUM 6000 control software included
- RS 485 port (alternative to the USB port) for long distance control (up to 1.2 km) of the system through the PC software
- Anti-feedback processor, useful to avoid feedbacks due to loudspeakers too close to microphones, loudspeaker high volume and many open microphones at the same time. PLAY INPUT
LED Light Source
This fixture uses an LED as it's light source
6 IN 1 HEX LED
A hex LED is a type of LED that contains six separate LEDs of different colors within a single package, allowing for a wider range of color options compared to traditional RGB LEDs.
RECHARGABLE BATTERY
This fixture has a rechargeable battery for wireless operation.
WIRELESS
This fixture has wireless functionality.
Remote Control
This fixture includes a wireless remote control, or has remote control functionality.
- DescriptionThe DMU 6100 the heart of the system allowing the direct connection of up to 60 microphone sets on two lines. Specific tools are available on the DM 6100 to test the correct wiring and operation of the system to help installation and maintenance. The status is available on the LCD, including advice of the type of consoles connected. From the front panel of the main unit LCD, function buttons and LEDs help the installer and the user in adjusting all the parameters and volumes, while a speaker and a ¼” jack work as audio monitoringPART NUMBER:17180010DMU 6100EAN 8024530005696Features
- Two universal inputs for connecting any additional sources such as a wireless microphone or a lectern microphone or any other complementary device, even a mixer-preamplifier.
- Two inputs can be configured in different ways; for instance they can be mixed with the system audio, have priority on system microphone sets, one mixed and one priority etc.
- Dedicated IN and OUT connections are available echo-free for the link to a teleconference system
- VOX operation or command operation are available
- The command switch can be programmed to work as FORCED-ON or FORCED-OFF always through configuration menu
- REC-PLAY input and outputs associated to a switch allow the connection of any recorder/player.
- 4 additional Auxiliary Outputs are available for the independent recording of the 2 universal inputs and each of the 2 lines of microphone sets
- DescriptionDUP 5EN is a universal speaker designed for wall installation. It is especially suitable for broadcasting alarm messages thanks to the highly intelligible sound reproduction and its resistance to high temperatures reached during fires. The terminal connection blocks, for input and output flameproof cables, are made of ceramic material. A thermal fuse protects the integrity of the line in case of heat affecting the speaker. Cables inside speaker made using flameproof leads.PART NUMBER:13100019DUP 5ENEAN 8024530014759Features
- 5" fullrange transducer.
- Power selectable (100 V): 6 W – 3 W – 1.5 W.
- 92 dB sensitivity.
- Colour white RAL 9016.
- Plastic body and steel grille.
- In/out ceramic terminal block.
- Thermal fuse protection.
- DescriptionThe software allows configuring small and medium VOICE-ALARM systems in accordance to the regulations (prescriptive method), using EN 54-24 loudspeakers and EN 54-16 management electronics of the RCF DXT 3000 Series (250W and 500W models; 2, 4 and 6 zones, in stand-alone or networked configuration) and related accessories.PART NUMBER:SW038118DXT 3000 PLANNERFeatures
- Control center planning
- Design and optimize speakers installation
- Automatic document creation
- Design multiple Zones and ADAs
- Based on UNI-CEN / TS 54-32 & UNI-ISO 7240-19
- 100V Line Calculator
- Microsoft Windows compatible
- DescriptionE 24 provides eighteen studio-quality 54 dB gain range Mic preamps with combo connectors. Two line inputs are switchable to Hi-Z input. The input section also features three stereo line inputs and a stereo return. Input channels from 1 to 8 are equipped with a single-control compressor. The eighteen mono channels are provided with 4-band EQs, including shelving high and low bands and 2 semi-parametric mid-bands (mid-high and mid-low) with frequency selection and switchable Q choice, wide or narrow. The stereo input channels are provided with a three band EQ.
PART NUMBER:
17140087 E 24 EAN 8024530015527 17140112 E 24 US, EAN 8024530017071 17140113 E 24 UK, EAN 8024530017088 17140114 E 24 JPFeatures- 18 Mic/line IN, 3 stereo line IN
- 1 Stereo return input
- 8 Single-control dynamic compressors (ch.1 - ch.8)
- 4 Band semiparametric EQ
- 3 Band EQ on stereo inputs
- 6 Aux sends per channel
- 100 mm progressive faders with dust cover
- 2 Stereo groups
- 32-Bit floating-point Z.CORE DSP effects section
- DescriptionES 3080 is an 80 W mixer-amplifier with a MP3 player directly accessible on the front panel. It can read USB sticks, SD cards, has an auxiliary input port with 3.5mm jack and Bluetooth technology for the connection with external sources. Moreover, it offers 2 mic-line audio inputs on removable connectors (the first input also has an XLR socket). Input 2 also has an RJ 45 port for quick connection of an RCF BM 3001 paging microphone (through CAT5 cable). The amplifier output is available either for low impedance speakers (min. 4 O) or 100 – 70 V constant voltage line (for speakers having 100 – 70 V transformers). Input 1 has a signal detection circuit (‘VOX’) for automatic priority. Inputs 1 and 2 can access the priority through an external command (connected to either the removable connector or the RJ 45 port). The MUSIC ON HOLD output directly sends the internal MP3 player signal to additional amplifiers, mixers, phone systems (‘music on hold’ function), etc. The PRE OUT output sends the signal (the same routed to the internal amplifier) to additional amplifiers. The 2 mic-line inputs have a high-pass filter (with a common on/off dip-switch) that are useful to improve speech intelligibility. The internal MP3 player and the AUX INPUT have tone controls (common for both). Front panel LEDs indicate the device state (ON, PROT), priority circuit enabled (PRIOR) and the signal level / peak (SIG/PK).PART NUMBER:12135107ES 3080EAN 8024530012717Features• Audio source with 80W power amplifier• MP3 player controlled from the front panel• MP3 inputs: USB flash, SD card, AUX jack 3.5mm• Bluetooth connection with external devices.• 2 universal inputs on removable screw-terminals and 1 AUX input• Configurable priority settings, VOX facility on input 1• Auxiliary output MUSIC ON HOLD to send the audio signal to external amplifiers or telephone switchboards• PRE OUT connector for additional power amplifiers• HI-PASS control (inputs 1 and 2)• Auxiliary input on RCA connector and MP3 player equipped with independent tone controls (bass and treble) and gain
LED Light Source
This fixture uses an LED as it's light source
CMY
This fixture utilizes CMY color mixing.
Framing
The fixture has framing capabilities.
LED Light Source
This fixture uses an LED as it's light source
CMY
This fixture utilizes CMY color mixing.
Framing
The fixture has framing capabilities.
LED Light Source
This fixture uses an LED as it's light source
CMY
This fixture utilizes CMY color mixing.
LED Light Source
This fixture uses an LED as it's light source
Zoom
This fixture features precise zooming capabilities.
LED Light Source
This fixture uses an LED as it's light source
Zoom
This fixture features precise zooming capabilities.
Prism
This fixture features a single prism.
CMY
This fixture utilizes CMY color mixing.
LED Light Source
This fixture uses an LED as it's light source
Zoom
This fixture features precise zooming capabilities.
LED Light Source
This fixture uses an LED as it's light source
HALO FX
This fixture has a unique halo fx ring.
DOUBLE PRISM
This fixture features a double prism.
IP 65
This fixture is dust-tight and can withstand low-pressure water jets from any direction.
DOUBLE PRISM
This fixture features a double prism.
IP 65
This fixture is dust-tight and can withstand low-pressure water jets from any direction.
IP 65
This fixture is dust-tight and can withstand low-pressure water jets from any direction.
Zoom
This fixture features precise zooming capabilities.
- DescriptionGS 60 is an outdoor speaker suitable for gardens that includes a 5” coaxial loudspeaker and an internal transformer for 100V / 70V constant voltage lines. GS 60 can be placed on several surfaces, such as wood, concrete or into the ground.Features• Body made of linear low-density polyethylene• Coaxial transducer with 5,25"oofer and 1,20'' tweeter• Suitable for installation on different surfaces• Can be used in constant voltage lines 100V / 70V or in low impedance (8 ohm)• Protection grade IP56
- DescriptionThe RCFACUSTICA H1315 WP is a three-way full range loudspeaker system that incorporates a 15” woofer, a 10” midrange and a 1.4” exit titanium compression driver for long throw applications. The system is very compact and provides very high output and accurate voice and sound reproduction. The system is equipped with the latest generation of RCF precision transducers, all of them with powerful neodymium motors. The internal passive filter provides crossover and equalization between the midrange and the compression driver. The system is driven in bi-amped mode, is capable of producing a Max SPL of 136 dB and handles 900 Watts AES (LF) + 400 Watt AES (MF/HF). The loudspeaker enclosure shape is multi-trapezoidal and offers a double coupling angle each side. Connections to the amplifier are made through a watertight multi-pole connector. The grille is in custom perforated aluminum with open-cell fibers and water repellent woven fabric backing. The cabinet is constructed of multi-ply baltic birch plywood and finished in a very resistant, textured, polyurea black paint.PART NUMBER:13000266H 1315 WPEAN 8024530009076Features
- Compact Arrayable 3-way System
- Fully Horn-loaded, 60° x 40° directivity
- 15" neodymium woofer with 4" voice coil
- 10" neodymium midrange
- 4" neodymium compression driver
- 136 dB Max SPL
- Bi-amp system (passive crossover MF/HF included)
- Active Mosfet Compression Driver Protection
- Rotable HF Horn
- System input power rating RMS 900 LF, 400 MF/HF
Specifications• Frequency Response (-10dB): 50 Hz ÷ 20000 Hz• Frequency Response (-3dB): 65 Hz ÷ 20000 Hz• Max SPL @ 1m: 136 dB• Horizontal coverage angle: 60°• Vertical coverage angle: 40°• Directivity index Q: 12• Amplification: Bi-Amp• Crossover Frequencies: 600 Hz• Nominal Impedance: 8 ohm• Protections: Active mosfet compression driver• Crossover Frequencies: Recommended 300 kHz, Internal MF/HF 1300 kHz• Compression Driver: 1 x 1.4'' neo, 3.0'' v.c• Midrange: 10'' neo, 3.0'' v.c• Woofer: 15'' neo, 4.0'' v.c• Input connectors: Amphenol eco/mat IP 67• Output connectors: Amphenol eco/mat IP 67For More Info: https://www.rcf.it/en/products/product-detail/h-1315-wp LED Light Source
This fixture uses an LED as it's light source
HALO FX
This fixture has a unique halo fx ring.
LED Light Source
This fixture uses an LED as it's light source
RGB LED Color
This fixture utilizes full color RGB LED as it's main or secondary light source.
Cool White
This fixture utilizes a Cool White LED as its main or secondary light source
INDIVIDUAL PIXEL CONTROL MODE
This fixture is capable of controlling pixels individually.
Zoom
This fixture features precise zooming capabilities.
LED Light Source
This fixture uses an LED as it's light source
RGB LED Color
This fixture utilizes full color RGB LED as it's main or secondary light source.
Cool White
This fixture utilizes a Cool White LED as its main or secondary light source
INDIVIDUAL PIXEL CONTROL MODE
This fixture is capable of controlling pixels individually.
Zoom
This fixture features precise zooming capabilities.
LED Light Source
This fixture uses an LED as it's light source
RGB LED Color
This fixture utilizes full color RGB LED as it's main or secondary light source.
Cool White
This fixture utilizes a Cool White LED as its main or secondary light source
Zoom
This fixture features precise zooming capabilities.
LED Light Source
This fixture uses an LED as it's light source
RGB LED Color
This fixture utilizes full color RGB LED as it's main or secondary light source.
Cool White
This fixture utilizes a Cool White LED as its main or secondary light source
Zoom
This fixture features precise zooming capabilities.
