CategoryDallas, TX
Aluminium box truss, towers, bases, and rigging hardware — the structural backbone that everything else in the rig hangs from. Stocked and shipped from our Van Nuys warehouse, direct from Acue Express.
01 — The Dallas market
Aluminium box truss, towers, bases, and rigging hardware — the structural backbone that everything else in the rig hangs from. This page covers buying them specifically in Dallas — who buys here, what the local work demands, and how to get fixtures direct instead of through a distributor markup.
Dallas-Fort Worth buys for permanent installs more than most markets. A large share of equipment sold here goes into a venue or worship space to stay, so buyers weigh warranty, parts availability and how it will look in year five.
For lighting truss, Dallas demand concentrates around church and worship services and weddings and receptions, with fixtures going into rooms ranging from Deep Ellum music venues to the smaller stages and studios around Frisco. The buyers are mostly venue owners and managers and AV integrators serving the metroplex.
02 — Specification guide
Five decisions that determine whether a fixture fits the room.
Box truss is the standard four-chord structural section for spans and towers. Lighter duty triangular and single-chord sections suit decorative and short-span work only.
Load capacity falls off sharply as span increases. Always design to the published load chart for the actual span, not a general rule of thumb.
Conical and bolt connections behave differently in assembly speed and rigidity. Consistency across your inventory matters more than which system you pick.
Ground support towers with proper bases and outriggers let you build a rig in venues with no rigging points — a very common requirement in hotels, ballrooms, and outdoor sites.
Mixing truss brands and profiles across an inventory creates real problems on site. Standardising on one system is worth the up-front discipline.
03 — Recommended
G34 Ground Support Tower System$2,859ground support truss tower
U34 6 Way Junction Block$429Lighting Truss & Rigging
U34 Truss Bases$579Lighting Truss & Rigging
U34 Box Truss$829Lighting Truss & Rigging
U34 Center Pivot Hinge$319Lighting Truss & Rigging
0.29m (0.95ft) G34 Box Truss$164Lighting Truss & Rigging
0.5m (1.64ft) G34 Box Truss$199Lighting Truss & Rigging0.75m (2.46ft) G34 Box Truss$209Lighting Truss & Rigging
1.5M (4.92') G31 Single Truss Tube Circle$329Lighting Truss & Rigging04 — Buy direct
Acue Express carries its own line and ships it from Van Nuys, California. For Dallas customers that means three concrete things: direct pricing with no distributor tier, consistent stock so a multi-unit order arrives matched, and warranty support handled by Acue rather than a third party.
Because we carry our own line rather than reselling someone else's, metroplex customers planning an install can count on the same model being available to expand later.
05 — Ready when you are
Room dimensions, throw distances, power availability and quantities — we work through all of it before you order.
06 — Questions
Still unsure? Call 818-646-7526 and talk to someone who has hung these fixtures.
For most portable stage and event work, 12-inch box truss carries typical lighting loads over standard spans. Larger spans and heavier rigs move to 20-inch and above. The correct answer always comes from the load chart for your specific span and point loads.
Yes — that is exactly what a ground support tower system is for. Towers with weighted bases and outrigger arms let you build a self-supporting goalpost or box rig in venues with no overhead rigging capability.
Standard box truss assembly is straightforward with trained hands. Anything involving overhead flying, motorised hoists, or loads over people should involve a qualified rigger — this is life-safety work and local requirements vary.
Yes. Bases, hinges, junction blocks, couplers, outrigger arms, TV mounts, and clamps are all available individually so you can expand or repair an existing system.
Yes. We ship lighting truss to Dallas and throughout the Dallas-Fort Worth metroplex from our Van Nuys, California facility. Dallas-Fort Worth is a two-to-three-day freight lane with excellent metroplex-wide delivery coverage.
Yes — call 818-646-7526. We will work through room dimensions, throw distances, power availability and quantities before you order. For Dallas projects that usually saves more money than any discount, because the most expensive mistake is buying the wrong fixture count.
07 — Index
